Roadmaps / Robotics
Electronics · 16 study weeks · 4 phases
Robotics Roadmap Beta
A robot has to sense, decide and move, and each of those can fail in ways a normal program never shows. These 16 study weeks take you from your first ROS 2 node to a mobile robot that maps a building, finds itself on the map, drives to goals and stops safely when something goes wrong. You build one product, a delivery robot in simulation, and every phase adds a checkpoint to it. At 8 hours a week the core path is 128 hours and takes 16 weeks. At 12 hours a week it takes about 11 weeks, and at 16 hours a week about 8 weeks. At the end you can say, with measurements, how often the robot reaches its goal, why it fails when it fails, and how far it travels before it stops. Everything runs in simulation on a laptop, and a small real robot is an optional last step.
This roadmap is in beta and keeps improving over time. If you spot an error, please email your suggestions and corrections to [email protected].
Read first
Phase 1 · Study weeks 1-4
ROS 2 foundations and a simulated robot
This phase makes the first checkpoint possible: a robot in simulation that you can drive, measure and record.
- 5 repos
- Milestone checkpoint
- Study week 1Nodes, topics, services and actions8 h
- Study week 2Robot description with URDF and xacro8 h
- Study week 3Gazebo and the ROS bridge8 h
- Study week 4ros2control: hardware interfaces and the controller manager8 h
Phase 2 · Study weeks 5-8
Sensing, state estimation and mapping
This phase makes the second checkpoint possible: a robot that knows roughly where it is and has a map of where it has been.
- 4 repos
- Milestone checkpoint
- Study week 5Lidar, IMU and camera messages8 h
- Study week 6Gaussian noise and covariance8 h
- Study week 7robotlocalization: fusing odometry and the IMU8 h
- Study week 8slamtoolbox: mapping, loop closure and saving a map8 h
Phase 3 · Study weeks 9-12
Autonomous navigation
This phase makes the third checkpoint possible: a robot that drives to goals by itself and a measured account of when it does not.
- 4 repos
- Milestone checkpoint
- Study week 9Nav2 architecture and lifecycle nodes8 h
- Study week 10Global planners8 h
- Study week 11Behavior trees8 h
- Study week 12Evaluating navigation: success rate over many runs8 h
Phase 4 · Study weeks 13-16
Safety, reliability and the real robot
This phase makes the last checkpoint possible: a robot that fails safely, with tests that prove it and a clear line between what simulation shows and what it cannot.
- 5 repos
- Milestone checkpoint
- Study week 13Hazards and a safe state8 h
- Study week 14Lifecycle management and restart8 h
- Study week 15launchtesting and simulation in CI8 h
- Study week 16The sim-to-real gap8 h